JX312 Acrylate Waterproof Coating is made with polymer acrylic emulsion as base material, blended with modifiers, active agents, additives and pigments. The formed film is tough and elastic with strong adhesion. It forms an integrated rigid-flexible waterproof system with the substrate to accommodate structural deformation and achieve long-term waterproof and anti-seepage performance.

Scope of Application

Suitable for waterproofing, anti-seepage and moisture-proofing of new & old building roofs, walls, water tanks and swimming pools.

Product Type

Classified as Type Ⅰ and Type Ⅱ according to physical properties

Performance Standard

《Polymer Emulsion Building Waterproof Coating》JC/T864-2008

Construction Workflow

Substrate Preparation → Primer Treatment → Reinforcement → Multi-coat Brushing

Product Features

• Excellent low-temperature resistance: no cracks when folded at -30℃;

• Superior aging resistance and strong UV resistance to extend roof service life;

• Can be applied on wet substrates with proper breathability, no blistering or peeling;

• Ultra-high bonding strength, suitable for substrates such as brick, concrete, glass, wood, metal, gypsum, rubber and mortar;

• Non-toxic, zero VOC, safe and eco-friendly;

• Easy application, fast curing, high efficiency and short construction period;

• Can be topped with synthetic colored protective coating for decoration.

Notes

• Apply the next coat only after the surface of previous coat has been dried. Stir evenly if slight sediment occurs during construction;

• The brushing direction of adjacent coats shall be perpendicular to each other;

• Natural curing for 7~9 days after coating completion.

Transportation & Storage

Store in well-ventilated and dry area, avoid direct sunlight. Storage temperature ≥0℃. Protect from freezing, rain, sun exposure, compression and collision during transportation, keep package intact.